The Quatra™ specialty lift offers 12,000 lbs. of vertical lifting power. This amazing design permits easy, unobstructed access from the front, back and sides. Its post-free structure utilizes quad-opposing scissor car lift design. There's virtually zero radial shift, so it fits well crowded spaces.
Features & Specs
12,000-lb. lifting capacity
Durable powder-coat finish that can withstand harsh environments and chemical spills and will provide years of protection
Extendable, hinged, collapsible, and stowable approach ramps
Multi‐position runway work steps
Non‐skid runways provide sure grip for vehicles and technicians
Dependable electric/hydraulic power system
Cylinders feature integrated velocity fuses to control sudden descent
Power console features simple operator controls
Open front design with clear center, sides and rear
Multi‐position automatic leveling system
Quad automatic safety locks with pneumatic push‐button release
Collapsible front tire stops clear for low vehicle skirts
Lubricated‐for‐life bearings on all pivot points
Rugged steel legs and formed steel runways
Turned, ground, polished and hardened zinc plated axle pins
Grease nipples on all moving pins and bearings
High efficiency hydraulic power unit provides faster raising and descent times
Easy access to hydraulic-electrical components for simple routine servicing
Easy to use and understand operator controls
Power unit console with easy access front panel
Can be surface or flush-mounted
Lifting capacity: 12,000 lbs. (5,443 kg) A - Min. Runway Height: 11.75” (298 mm) B - Max. Lifting Height: 75" (1,910 mm) C - Overall Width: 88" (2,184 mm) D - Length / Ramps Extended: 276.75" (7,029 mm) D - Length / Ramps Collapsed: 257.75" (6,547 mm) D - Length / Ramps Stowed: 225" (5,715 mm) E - Runway Width: 24" (610 mm) F - Width Between Runways: 40" (1,028 mm) G - Length of Runways: 193" (4,902 mm) H - General Service Wheelbase: 175.5" (4,458 mm)
Min. Wheelbase @ Capacity: 135" (3,429 mm) Min. Wheelbase @ 75% Capacity: 120" (3,048 mm) Min. Wheelbase @ 50% Capacity: 100" (2,540 mm) Min. Wheelbase @ 25% Capacity: 80" (2,032 mm) Locking Positions: 13 Standard Motor: 220 VAC / 60 Hz / 1 Ph Shipping Weight: 4,793-lbs. (2,174 kg) Shipping Dimensions: 197'' x 25'' x 36'' (5,003 mm x 635 mm x 914 mm)
The Quatra™ XR-12000L Scissor Lift
BendPak's Quatra is one of those once-in-a-generation shop lifts that saves space and increases lift capacity. For such a compact size, it’s amazing that it breezily achieves 12,000 lbs. of lift.
Reliable balance and mechanical locking
The Quatra features zero radial shift, which is basically unheard of for a car lift that raises vehicles up to 12,000 lbs. Whereas parallelogram lifts need at least a little extra floor space to accommodate their lateral shift, the Quatra goes straight up-and-down. Additionally, the XR-12000L is equipped with an intelligent hydraulic regulating manifold. This device has four, two-position ball valves that create a balance of hydraulic pressure between the master and slave cylinders. This mission-critical system guarantees a level rise and descent at all times. Not only that, each ball valve is part of a mechanical lock system that lets you leave the Quatra raised indefinitely. The manifold valve assembly is found right on the power console. It also features a cover that can be removed for maintenance and other adjustments.
The Quatra benefits from an ergonomic design that helps operators raise and lower quickly and safely. The increase in productivity is obvious from the first time you lift a vehicle. The ability to get underneath a raised lift from any angle is unique for a scissor lift (although the Quatra is not a true scissor lift). The lift rises and descends rapidly to your preferred height with just the push of a button.
It’s all in the approach
When it comes to positioning vehicles on a car lift, there is no other model on the market that makes it easier. The approach ramps have a wide range of extension, from 56” all the way up to an incredible 79”. Extend them in just seconds flat. These ramps are favorites of our customers, especially when there isn’t much space to work with but a lot of work to get done. In short, the Quatra series lift by BendPak is the solution for customers who want one of the industry’s most versatile and comprehensive car lift models.
Optional 6,000-lb. capacity rolling jacks (model RBJ6000)make a great addition to increase service capacity. Each jack has telescoping arms and frame contact pads that can be extended over the runways and positioned under vehicle lifting points. Each jack features three safety‐lock positions and stackable truck and van adapters for increased lifting height and better access to frame contact points on high ground‐clearance vehicles. The jacks come equipped with a commercial grade air‐hydraulic pump requiring a maximum pressure of 125 psi and 10‐20 CFM.
Anintegrated rolling bridge airline kitis available that installs neatly within the runway to create a more tidy hose-routing solution for single or dual jack purpose.
The escape1800 replaced my 38 year old steel wood stove. I’ve had it for 2 weeks now. Nite time in the 9-11 degree . Early mornings 20’s and day time highs 40’s. It performs extremely well. Took a bit to get used to 2 nd burn technology. I heat a large area 1500 sq ft plus. It does a very good job I recommend a blower to move the heat around. For its 75000 BTU rating its a HEAT MONSTER. Excellent service and great price . Its 5 stars in my book.
Retired my old wood stove after 38 years. I’ve had the Drolet 1800 on legs in use for 2 weeks now. Morning temperature hover around 9-11 degrees. Daytine in the 30’s and nights low 20’s. Its a real HEAT MONSTER. After 8 hr burn overnite my stove is still 150-200 degrees. Couple of small pieces of wood and away we go. A good sized firebox. Actually 21 inch wood fits. My only suggestion is if you want to move the heat around more invest in the optional blower. Fantastic stove at a GREAT price. And excellent customer service my stove was out of stock and customer service kept me up to date on delivery.